By John Timmer, Ars Technica
Following the events at the Fukushima Daiichi nuclear reactors in Japan has been challenging. At best, even those present at the site have a limited view of what’s going on inside the reactors themselves, and the situation has changed rapidly over the last several days. Meanwhile, the terminology involved is somewhat confusing—some fuel rods have almost certainly melted, but we have not seen a meltdown; radioactive material has been released from the reactors, but the radioactive fuel currently remains contained.
Over time, the situation has become a bit less confused, as cooler heads have explained more about the reactor and the events that have occurred within it. What we’ll attempt to do here is aggregate the most reliable information we can find, using material provided by multiple credible sources. We’ve attempted to confirm some of this information with groups like the Nuclear Regulatory Commission and the Department of Energy but, so far, these organizations are not making their staff available to talk to the press.Inside a Nuclear Reactor
Nuclear reactors are powered by the fission of a radioactive element, typically uranium. There are a number of products of this reaction, but the one that produces the power is heat, which the fission process gives off in abundance. There are different ways to extract electricity from that heat, but the most common way of doing so shares some features with the first steam engines: use it to boil water, and use the resulting pressure to drive a generator.
Radioactivity makes things both simpler and more complex. On the simpler side, fission will readily occur underwater, so it’s easy to transfer the heat to water simply by dunking the nuclear fuel directly into it.
Unfortunately, the radioactivity complicates things. Even though the fuel is sealed into rods, it’s inevitable that this water will pick up some radioactive isotopes. As a result, you can’t just do whatever you’d like with the liquid that’s been exposed to the fuel rods. Instead, the rods and water remain sealed in a high-pressure container and linked pipes, with the hot water or steam circulated out to drive machinery, but then reinjected back into the core after it has cooled, keeping a closed cycle.
The water recirculation doesn’t just let us get power out of the reactor; it’s essential to keeping the reactor core cool. Unless the heat of decay is carried away from the core, its temperature will rise rapidly, and the fuel and its structural support will melt.
The Fission Reaction
Completely inserting control rods to limit uranium’s fission, however, doesn’t affect what’s happened to the products of previous reactions. Many of the elements that are produced following uranium’s split are themselves radioactive, and will decay without needing any encouragement from a neutron. Some of the neutrons from the reactor will also be absorbed by atoms in the equipment or cooling water, converting those to radioactive isotopes. Most of this additional radioactive material decays within the span of a few days, so it’s not a long-term issue. But it ensures that, even after a reactor is shut down by control rods, there’s enough radioactive decay around to keep things hot for a while.
All of which makes the continued operation of the plant’s cooling system essential. Unfortunately, cooling system failures have struck several of the reactors at Fukushima Daiichi.
Surviving the Quake, But Not the Tsunami
Because cooling is so essential to a plant’s operation, there are a few layers of backups to keep the pumps running. For starters, even if the reactors themselves are taken offline, the coolant pumps can receive power from offsite; this option was eliminated by the earthquake itself, which apparently cut off the external power to Fukushima. The earthquake also triggered a shutdown of the reactors, removing the obvious local source of power to the pumps. At this point, the first backup system kicked in: a set of on-site generators that burn fossil fuels to keep the equipment running.
Those generators lasted only a short while before the tsunami arrived and swamped them, flooding parts of the plant’s electrical system in the process. Batteries are in place to allow a short-term backup for these generators; it’s not clear whether these failed due to the problems with the electrical system, or were simply drained. In any case, additional generators were slow to arrive due to the widespread destruction, and didn’t manage to get the pumps running again when they did.
As a result, the plants have been operating without a cooling system since shortly after the earthquake. Even though the primary uranium reaction was shut down promptly, the reactor cores have continued to heat up due to secondary decay products.
Ugly Possibilities
Without cooling, there are a number of distinctly ugly possibilities. As water continues to be heated, more steam will be generated within the reactor vessel, increasing the pressure there, possibly to the point where the vessel would fail. The reactor vessel would burst into a primary containment vessel, which would limit the immediate spread of radioactive materials. However, the rupture of the reactor vessel would completely eliminate any possibility of restoring the coolant system, and might ultimately leave the reactor core exposed to the air.
And that would be a problem, since air doesn’t carry heat away nearly as efficiently as water, making it more likely that the temperatures would rise sufficiently to start melting the fuel rods. The other problem with exposing the fuel rods to air is that the primary covering of the rods, zirconium, can react with steam, reducing the integrity of the rods and generating hydrogen.
To respond to this threat, the plant’s operators took two actions, done on different days with the different reactors. To begin with, they attempted to pump cold sea water directly into the reactors to replace the boiled-off coolant water. This was not a decision made lightly; sea water is very corrosive and will undoubtedly damage the metal parts of the reactor, and its complex mixture of contents will also complicate the cleanup. This action committed the plant operators to never running it again without a complete replacement of its hardware. As an added precaution, the seawater was spiked with a boron compound in order increase the absorption of neutrons within the reactor.
The second action involved the bleeding off of some pressure from the reactor vessel in order to lower the risk of a catastrophic failure. This was also an unappealing option, given that the steam would necessarily contain some radioactivity. Still, it was considered a better option than allowing the container to burst.
This decision to bleed off pressure ultimately led to the first indications of radioactivity having escaped the reactor core and its containment structure. Unfortunately, it also blew the roof off the reactor building.
Hard Choices to Bad Results
As seen in some rather dramatic video footage, shortly after the pressure was released, the buildings housing the reactors began to explode. The culprit: hydrogen, created by the reaction of the fuel casing with steam. The initial explosions occurred without damaging the reactor containment vessel, meaning that more significantly radioactive materials, like the fuel, remained in place. Larger increases in radioactivity, however, followed one of the explosions, indicating possible damage to the containment vessel, although levels have since fluctuated.
However, the mere presence of so much hydrogen indicated a potentially serious issue: it should only form if the fuel rods have been exposed to the air, which indicates that coolant levels within the reactor have dropped significantly. This also means that the structural integrity of the fuel rods is very questionable; they’ve probably partially melted.
Part of the confusion in the coverage of these events has been generated by the use of the term “meltdown.” In a worst-case scenario, the entire fuel rod melts, allowing it to collect on the reactor floor, away from the moderating affect of any control rods. Its temperature would soar, raising the prospect that the material will become so hot that it will melt through the reactor floor, or reach a source of water and produce an explosive release of steam laced with radioactive fuel. There is no indication that any of this is happening in Japan at the moment.
Still, the partial melting of some fuel does increase the chances that some highly radioactive material will be released. We’re nowhere near the worst case, but we’re not anywhere good, either.
An additional threat has recently become apparent, as one of the inactive reactors at the site suffered from an explosion and fire in the area where its fuel is being stored. There is almost no information available about how the tsunami affected the stored fuel. Hydrogen is again suspected to be the source of the explosion, which again suggests that some of the fuel rods have been exposed to the air and could be melting. It’s possible that problems with the stored fuel contributed to the recent radiation releases, since there isn’t nearly as much containment hardware between the storage area and the environment.
Again, plans have been made to add sea water to the storage area, both by helicopter drops attempted earlier today, and through standard firefighting equipment.
Where We Stand
So far, the most long-lived radioactive materials at the site appear to remain contained within the reactor buildings. Radioisotopes have and continue to escape containment, but there’s no indication yet that these are anything beyond secondary decay products with short half-lives.
Although radiation above background levels has been detected far from the reactor site, most of this has been low-level and produced by short-lived isotopes. Prevailing winds have also sent a lot of the radioactive material out over the Pacific. As a result, most of the problems with radioactive exposure have been in the immediate vicinity of the Fukushima Daiichi reactors themselves, where radiation has sometimes reached threatening levels; it’s been possible to hit a yearly safe exposure limit within a matter of hours at times. Areas around the reactors have been evacuated or subject to restrictions, but it’s not clear how far out the areas of significant exposure extend, and they may change rapidly.
All of this is severely complicating efforts to get the temperatures under control. Personnel simply can’t spend much time at the reactor site without getting exposed to dangerous levels of radioactivity. As a result, all of the efforts to get fresh coolant into place have been limited and subject to interruption whenever radiation levels spike. The technicians who continue to work at the site are putting their future health at risk.
There is some good news here, as each day without a critical failure allows more of the secondary radioactive materials to decay, lowering the overall risk of a catastrophic event. In the meantime, however, there’s little we can do to influence the probability of a major release of radioactive material. Getting seawater into the reactors has proven to be hit-or-miss, and we don’t have a strong sense of the structural integrity of a lot of the containment buildings at this point; what’s happening in the fuel storage areas is even less certain. In short, our only real option is to try to get more water in and hope for the best.
Future of Nuclear Energy
Nuclear power plays a big role in most plans to limit the use of fossil fuels, and the Department of Energy has been working to encourage the building of the first plants in decades within the US. The protracted events in Japan will undoubtedly play a prominent role in the public debate; in fact, they may single-handedly ignite discussion on a topic that the public was largely ignoring. The take-home message, however, is a bit tough to discern at this point.
In some ways, the Japanese plants, even though they are an old design, performed admirably. They withstood the fifth-largest earthquake ever recorded, and the safety systems, including the automatic shutdown and backup power supplies, went into action without a problem. The containment systems have largely survived several hydrogen explosions and, so far, the only radioactive materials that have been released are short-lived isotopes that are concentrated in the plant’s vicinity. If things end where they are now, the plants themselves will have done very well under the circumstances.
But, as mentioned above, ending where we are now is completely beyond our control, and that highlights some reasons why this can’t be considered a triumph. Some of the issues are in the design. Although the plant was ready for an extreme event, it clearly wasn’t designed with a tsunami in mind—it is simply impossible to plan for every eventuality. However, this seems to be a major omission given the plant’s location. It also appears that the fuel storage areas weren’t nearly as robustly designed as the reactors.
Once the cooling crisis started, a set of predictable issues cropped up. We can never send humans inside many of the reactor areas, leaving us dependent upon monitoring equipment that may not be working or reliable during a crisis. And, once radiation starts to leak, we can’t send people to many areas that were once safe, meaning we’ve got even less of an idea of what’s going on inside, and fewer points to intervene at. Hardware that wasn’t designed for some purposes, like pumping sea water into the reactor vessel, hasn’t worked especially well for the emergency measures.
On balance, the safety systems of this reactor performed reasonably well, but were pushed up against a mixture of unexpected events and design limits. And, once anything starts to go wrong with a nuclear reactor, it places the entire infrastructure under stress, and intervening becomes a very, very difficult thing to do.
This latter set of issues mean that the surest way to build a safe nuclear plant is to ensure that nothing goes wrong in the first place. There are ways to reduce the risk by adding more safety and monitoring features while tailoring the design to some of the most extreme local events. But these will add to the cost of a nuclear plant, and won’t ever be able to ensure that nothing goes wrong. So, deciding on if and how to pursue expanded nuclear power will require a careful risk analysis, something the public is generally ill-equipped for.
Top image: Ars Technica.
Source: Ars Technica.
See Also:
- Japan Quake Epicenter Was in Unexpected Location
- Japan Struggles to Control Quake-Damaged Nuke Plant
- North America Safe From Radioactive Particles
- Earthquake Is Biggest in Japan’s Recorded History
- Midway’s Albatrosses Survive the Tsunami
- China Takes Lead in Race for Clean Nuclear Power
- How One Nuclear Skirmish Could Wreck the Planet
No comments:
Post a Comment